Zurück zu Projekte

19034.2 PFIW-IW

Entwicklung eines neuartigen Compoundierprozesses für die Produktion von Calciumcarbonat Masterbatchen

Zusammenfassung

Entwicklung eines neuartigen Compoundierprozesses für die Produktion von Calciumcarbonat Masterbatchen

Weitere Texte

Abstract

Thermoplastics can be filled with mineral additives. These fillers are generally used to lower the consumption of more expensive oil-based polymeric materials, hence reducing carbon footprint and cost but also to improve the properties of the final products. The desired incorporation of fine-ground fillers to achieve these properties improvement only works if they are well dispersed within the polymer. However, a perfect dispersion is difficult to achieve due to the large specific surfaces of fine particles and their intrinsic tendency to form agglomerates. As a result, the development of a novel and efficient compounding process for the production of masterbatch with tailor-made submicron CaCO3 using a twin-screw extruder and special feeding system would address the afore-mentioned shortcomings to the benefit of the polymer industry as well as the whole value chain up to the consumer.

Beteiligte

Michael Trinkl

Wirtschaftspartner

michael.trinkl@omya.com

Omya International AG CHE-317.749.088 Michael Trinkl Baslerstrasse 42 4665 Oftringen AG CH

Daniel Schwendemann

Kontaktperson

daniel.schwendemann@hsr.ch

OST - Ostschweizer Fachhochschule Daniel Schwendemann Oberseestrasse 10 8640 Rapperswil SG CH

Projektdetails

Forschungsstelle
INNOSUISSE
Projektstatus
Abgeschlossen
Projekttyp
Forschungsprojekt
Startdatum
2016-08-31
Enddatum
2020-01-31
Bewilligte Gesamtkosten
CHF 399688.00
Sektion
23 Förderbereich Engineering
NABS Politikbereich
Industrielle Produktivität und Technologie

Forschungsdisziplinen

  • T130 Production technology 100.0%